Pin Tract Release Incision Using Mini Gelpi Retractors
The minimum release incision size should be that which yields no soft tissue tension on the pin at any point during full flexion and extension of the joints above and below the fixator pins.
Read moreUnicondylar Fracture Repair Using Miniature Stick-Pins
Miniature stick-pins are useful for stabilizing condylar fractures of the distal humerus in small (<5 kg), young animals. They have more holding power in the soft bone...
Read moreSurgery-Friendly Draping Method
Manipulation of limbs during orthopedic procedures relies on drapes being free to move. Unfortunately, drapes often do not realign...
Read moreSimplified Countersinking of an IM Pin
Countersinking of intramedullary pins is occasionally required in femoral, tibial, and humeral fractures to minimize morbidity due to joint interference or soft tissue impingement...
Read morePatient Positioning for Mandibular Fracture Repair
Positioning a patient with a mandibular fracture for optimal access to the oral cavity, ensuring proper reduction/dental occlusion, and placing implants easily can be challenging.
Read moreSeparating ESF Pins within ESF Packs
Consider using a syringe case to segregate ESF pins within ESF packs. Keeping different diameters...
Read moreEasy ESF Inventory Management
This tackle box tip-n-trick allows for ready refill without digging through boxes of assorted components in hopes of finding the necessary pieces, or worse finding that a desired component is not on hand at a time of need.
Read moreIncreasing Longevity with Pin Caps
Cut ends of fixation pins and IM pins have one thing in common - sharp ends that present a hazard to the surgeon, patient, and owners. This danger is easily eliminated with a quick-fix post-surgery.
Read moreAssembly of an SK ESF Clamp
Disassembling SK ESF clamps for cleaning purposes often results in improper reassembly when one is unfamiliar with the SK ESF clamp; leading to frustration on behalf of the surgeon. A quick and simple method...
Read moreHip Luxation DIY Drill Sleeve
Craniodorsal hip luxation is a common problem in dogs. For various reasons, open reduction techniques are often employed to restore hip integrity and function. The Knowles toggle pin technique is a popular method of achieving stability...
Read moreTibial Tuberosity Transposition without Tension Bands or K-wires
The historical standard for affixing the tibial tuberosity into position after the TTT is performed involves the use of K-wires and a tension band. After experiencing a couple...
Read moreMinimally Invasive Plate Osteosynthesis (MIPO)
A simple two-ring circular fixator construct is often used to distract fractures out to length and facilitate reduction when performing minimally invasive plate osteosynthesis. This is particularly useful when addressing antebrachial or crural fractures.
Read moreReduce Contamination Following a Hanging Leg Prep
A method commonly performed with orthopedic surgery to reduce contamination is the application of vet wrap and sterile drape material; a preventative measure easily accomplished with minimal pre-planning.
Read moreEliminating Sharp Wire Ends
A common question asked in relation to circular or hybrid external fixation is, "After tensioning fixation wires, how do I handle the sharp ends?" Two schools of thought exist...
Read moreOrganize ESF Pin Inventory with Common Office Supplies
The purchase of only a few, common office supplies will streamline external fixation pin inventory for easy access and reorder while minimizing setup cost.
Read moreTensioning Wires with a Dyna Wire Tensioner
Proper wire tensioning of small diameter wires on circular and hybrid fixator frames is simple when using the semi-calibrated Dyna wire tensioner. Recommended tension levels...
Read more