Shopping Cart
Miniature Stick-pin

Miniature Stick-pin

 

Login to Purchase

Stick-pins are nearly identical to miniature Interface pins but do not include the roughened shaft that enhances grip to acrylic and epoxies, and are not prone to failure.

Implant quality 316LVM, stainless steel

Additional Product Information

Over the years, many customers have used miniature Interface fixation half-pins for a variety of non-external fixation purposes when a K-wire sized implant with a short threaded portion is what the surgeon really desires. Such applications are frequent in small dogs, cats, avian, and exotic patients and include: tibial crest translocations, capital physeal fractures and avulsion fractures of the greater trochanter. These applications often involve bending the pin over as in tension band applications. When miniature Interface pins are bent acutely at their roughened shaft area, they may break. 

Predrilling for a 0.9 mm miniature stick-pin is complicated by the absence of a well-defined and optimal drill bit diameter. Alternatively, one may predrill with 0.7 mm (0.028") K-wire. When predrilling with K-wires, remember to drill at a low RPM to avoid excess heat generation. K-wires dull rapidly and repeated use should be limited to 2 or 3 holes per point.


  • Specifications
  • Learn
  • FAQs
  • You Might Also Like


Product Specifications

Part No. Length Recommended Drill Bit Shaft/Thread Diameter (inch) Shaft/Thread Diameter Thread Length
Part No. Length (mm): 75 mm2.953 in Recommended Drill Bit: Shaft/Thread Diameter (inch): 0.035" | 0.045" Shaft/Thread Diameter (mm): 0.9 mm | 1.1 mm0.0 in Thread Length: 12 mm0.472 in
Part No. Length (mm): 75 mm2.953 in Recommended Drill Bit: 1.1 mm0.039 in Shaft/Thread Diameter (inch): 0.045" | 0.056" Shaft/Thread Diameter (mm): 1.1 mm | 1.4 mm0.039 in Thread Length: 12 mm0.472 in
Part No. Length (mm): 75 mm2.953 in Recommended Drill Bit: 1.5 mm0.039 in Shaft/Thread Diameter (inch): 0.062" | 0.075" Shaft/Thread Diameter (mm): 1.6 mm | 1.9 mm0.039 in Thread Length: 12 mm0.472 in
Part No. Length (mm): 75 mm2.953 in Recommended Drill Bit: 1.5 mm0.039 in Shaft/Thread Diameter (inch): 5/64" | 0.091" Shaft/Thread Diameter (mm): 2.0 mm | 2.3 mm0.079 in Thread Length: 15 mm0.591 in

Unicondylar Fracture Repair Using Miniature Stick-Pins

Miniature stick-pins are useful for stabilizing condylar fractures of the distal humerus in small (<5 kg), young animals. They have more holding power in the soft bone...

Read more