Shopping Cart
StickTite Drill Bit, Special Point Geometry

StickTite Drill Bits


StickTite point geometry prevents walking or skidding at initial drilling and is especially beneficial when hole placement is critical and with freehand drilling applications.

Hardened stainless steel.

Additional Product Information

Compared to other drill bits, StickTite bits are designed to drill with minimal forward pressure, to be much easier to start, and to drill accurately when not drilling perpendicular to the bone. 

If forced into the opposite bone wall, they will engage rapidly with potential for damage to the bit. The sharp cutting geometry will also attempt to cut or grab when hitting screws or pins – resulting in damaged drill bits. If hitting a pin or screw is likely, it is recommended that standard ESF drill bits be used. 

In order to support sleeved predrilling, IMEX drill bits are considerably longer than standard bone plating drill bits. Surgeons must be aware of this length and avoid side pressures resulting in drill bit flexion and bowing, especially when not using drill sleeves.

  • Specifications
  • Learn
  • FAQs
  • You Might Also Like

Product Specifications

Part No. Diameter Length
Part No. Diameter (mm): 2.0 mm0.079 in Length (mm): 120 mm4.724 in
Part No. Diameter (mm): 2.3 mm0.079 in Length (mm): 125 mm4.921 in
Part No. Diameter (mm): 2.5 mm0.079 in Length (mm): 135 mm5.315 in
Part No. Diameter (mm): 2.7 mm0.079 in Length (mm): 140 mm5.512 in
Part No. Diameter (mm): 3.1 mm0.118 in Length (mm): 150 mm5.906 in
Part No. Diameter (mm): 3.5 mm0.118 in Length (mm): 160 mm6.299 in
Part No. Diameter (mm): 3.9 mm0.118 in Length (mm): 165 mm6.496 in
Part No. Diameter (mm): 6.2 mm0.236 in Length (mm): 180 mm7.087 in