Shopping Cart
Interface Fixation Half-pin, Cancellous Threads, End Threaded with Trocar Point

Interface Fixation Half-Pin, Cancellous Threads

 

Interface fixation half-pins with cancellous thread profile feature a deep thread with larger pitch than standard thread Interface fixation pins. These pins have proven particularly effective in soft metaphyseal bone application where adequate bone stock is present to support the increased thread diameters.

Part numbers ending with "L" indicate extended length pins.

Implant quality 316LVM, stainless steel

Additional Product Information

These pins are contraindicated in diaphyseal bone, in the radius or ulna, and in the hard bone of the humeral condyle. Rarely is more than one cancellous pin placed into a single ESF construct. Standard length pins used in the majority of applications while extended length pins are occasionally used when additional thread length is needed to span areas of larger bone diameter.


  • Specifications
  • Learn
  • FAQs
  • You Might Also Like


Product Specifications

Part No. Compatible ESF Clamp Overall Length Recommended Drill Bit Shaft/Thread Diameter (inch) Shaft/Thread Diameter Thread Length
Part No. Compatible ESF Clamp: Small Overall Length: 115 mm4.528 in Recommended Drill Bit: 2.3 mm0.079 in Shaft/Thread Diameter (inch): 3/32" | 9/64" Shaft/Thread Diameter (mm): 2.4 mm | 3.5 mm0.079 in Thread Length: 28 mm1.102 in
Part No. Compatible ESF Clamp: Small Overall Length: 150 mm5.906 in Recommended Drill Bit: 2.3 mm0.079 in Shaft/Thread Diameter (inch): 3/32" | 9/64" Shaft/Thread Diameter (mm): 2.4 mm | 3.5 mm0.079 in Thread Length: 31 mm1.22 in
Part No. Compatible ESF Clamp: Large Overall Length: 125 mm4.921 in Recommended Drill Bit: 3.1 mm0.118 in Shaft/Thread Diameter (inch): 1/8" | 3/16" Shaft/Thread Diameter (mm): 3.2 mm | 4.8 mm0.118 in Thread Length: 35 mm1.378 in
Part No. Compatible ESF Clamp: Large Overall Length: 150 mm5.906 in Recommended Drill Bit: 3.1 mm0.118 in Shaft/Thread Diameter (inch): 1/8" | 3/16" Shaft/Thread Diameter (mm): 3.2 mm | 4.8 mm0.118 in Thread Length: 50 mm1.969 in
Part No. Compatible ESF Clamp: Large Overall Length: 150 mm5.906 in Recommended Drill Bit: 4.7 mm0.157 in Shaft/Thread Diameter (inch): 3/16" | 1/4" Shaft/Thread Diameter (mm): 4.8 mm | 6.3 mm 0.157 in Thread Length: 50 mm1.969 in
Part No. Compatible ESF Clamp: Large Overall Length: 200 mm7.874 in Recommended Drill Bit: 4.7 mm0.157 in Shaft/Thread Diameter (inch): 3/16" | 1/4" Shaft/Thread Diameter (mm): 4.8 mm | 6.3 mm 0.157 in Thread Length: 57 mm2.244 in